Dual control electrostatic powder coating machine supports two operators to work at the same time, could save both time and labour. COLO-191S powder coating machine with digital valve control function supports to adjust voltage and current, precise adjustment of powder output to set the optimum parameters for powder coating different workparts.
COLO-191S Powder Gun Controller
Button type control is more convenient to operate, and switch from different application programs flexibly. There are 3 pre-set application modes: flat-coating for large plates, corner-coating for complex parts, re-coating for repairing jobs.
Support to store 20 application programs for powder coating. Different powders or parts require specific program settings. The 20 personalized application programs help operators to fastly start working and each part will recieve optimal powder coating effect.
COLO-08 Manual Powder Coating Spray Gun
100 kV manual spray gun ensures safe operation meanwhile maximizes powder charging capacity with high efficiency.
This lightweight and ergonomical spray gun is able to reduce fatigue from working long hours.
Flat spray nozzles and round spray nozzles with deflectors are ideal for powder coating different shape of parts.
Large Capacity Fluidizing Powder Hopper
Size: Dia 36 * Height 62 cm
This hopper with fluidized plate allows powders easily to be conveyed from the hopper to spray gun with a high degree of uniformity and consistency. Fluidizing action breaks up powder accumulation, removes absorbed moisture, improves powder coating quality.
|Voltage||AC 220V / 110V|
|Max Voltage||0-100 KV adjustable|
|Max Powder Injection||600g/min|
|Max input air pressure||10kg/cm|
|Optimum input-air pressure||6kg/cm|
|Minimum input-air pressure||4kg/cm|
|Maximum water vapor content or compressed||1.4g/Nm3|
|Maximum oil vapor content of compressed air||0.1ppm|
|Maximum compressed -air consumption||13.2m3/h|
|Temperature Range in Use||-10 ℃-50 ℃|
|Maximum Output Current||180Ua|