For conveyor chain running straight and level at standard length of 3 meters, length of track could be cut according to the working space.
Standard diameter: 1.2m*180°
Used in the ascending and descending part of the conveyor chain, it can be cut at any angle according to working space.
Each drive unit of conveyor line should be equipped with a set of inspection track, which is generally located between the outlet of drive unit and tension device for convenience of inspection and maintenance.
Standard diameter: 0.6-2m*180°
Used at the horizontal turning part of the conveyor chain running, could be cut at any angle according to the working space. Customers can customize different diameters of the horizontal curved track.