 Whatsapp: 0086 18158198022        Email:marketing@colourspray.com 
You are here: Home » products » Powder Coating Machine » Laboratory Powder Coating Unit » KF-X1 Small Powder Coating Spray Kit



Share to:
sharethis sharing button

KF-X1 Small Powder Coating Spray Kit

KF-X1 applies advanced "digital valve controlled" technology that is designed for easy operation and effective coating, which supports most complicated workparts.
  • KF-X1

  • COLO

KF-X1-TH Small Powder Coating Spray Kit

KF-X1-TH Small Powder Coating Spray Kit with 10 lbs fluidizing hopper is ideal for small batch jobs. The powerful technology allows to overcome all kinds of challenging situations, such as applying metallic powders, or penetrating to hard-to-reach corners. It always produces uniform powder coating films on the parts .

KF-X1-TH Small Powder Coating Spray Kit

KF-X1 Powder Coating Spray Gun Controller

powder gun controller

1. Three preset standard programs: 

Flat parts program is ideal for spraying panels and flat parts.

Complex parts program is designed for some parts with complex shapes and deep corners.

Recoat program parts is optimized for parts which have already been coated.

2. Support to store coating programs up to 20, features convenient to spray the same type products next time.

3. Digital air flow technology for more accurate pneumatic data setting, ensures better atomization.

4. The precise powder output is able to control the thickness of coating film, results a consistent powder coating effect.

5. Voltage and current could be adjusted flexibly ( Voltage 0-100kV, Current Max.180μa ).

COLO-08 Manual Spray Gun Features

powder coating spray gun

1. Weight only 500g, COLO-08 is a lightweight among powder spray guns, and also maintains the practical functions.

2. 100 kV manual spray gun ensures safe operation whilst maximizes powder charging capacity with high efficiency.

3. Nozzles are made of non-stick materials, professionally designed to minimize powder accumulation as well as enhance penetration ability.

10lbs Small Powder Coating Hopper

10lbs Powder Coat Hopper 

1. Size: D20*H30 cm, Capacity: 10 lbs

2. Fluidization of powder is main to break up agglomerations and remove absorbed moisture, keeps powder with a high degree of uniformity and consistency.

3. Avoids overflow, and hardly get contaminated as it is not exposed outside, ideal for clean powder coating.

KF-X1 Powder Coating Spray Gun Technical Data

VoltageAC 220V / 110V
Output VoltageDC24V
Max Voltage0-100 KV adjustable
Max Powder Injection600g/min
Max input air pressure10kg/cm
Optimum input-air pressure6kg/cm
Minimum input-air pressure4kg/cm
Maximum water vapor content or compressed1.4g/Nm3
Maximum oil vapor content of compressed air0.1ppm
Maximum compressed -air consumption13.2m3/h
Temperature Range in Use-10 ℃-50 ℃
Gun Weight500g
Maximum Output Current180Ua