COLO powder coat cure ovens are used to cure powder coating finishes, it uses high-quality components that never compromise quality and performance. These powder coating ovens reach curing temperatures faster and cost less to operate because the hot air flow keeps the oven interior evenly heated while saving fuel. Our powder coat cure ovens perform better and result in a finish of the highest quality and service life.
Gas/LPG powder coating oven with a high performance burners takes full utilization of fuels, gives much quicker raise to a required temperature comparing with electric heating, as well as more environmental-friendly than diesel fired oven.
Heat exchanger is made of seamless stainless steel pipe #310S, 8x8 array, 3-4mm thickness, high temperature-resistant, long lifespan that transfers clean hot air.
A fan circles hot airs in the chamber ensure even temperature distribution with a minimal temperature difference, such an oven will obtain a quality finish with even gloss and consistent color.
Oven Wall Materials
Interlayer is 100mm thick rockwool insulation board density 120kgs/cbm. with heat-resistent galvanized innerwall and durable color steel outwall. It is an optimal design for minimum temperature dropping.
High precison and reliable heating process, easy to set accurate required temperature on the panel, as well as set the heating time and fan working. Once the time arrives, the oven will stop automatically.
Transpot System - Double Trolleys
An economical solution when leading heavy elements. Using double trolleys will not pollute the inner chamber and ensure the color purity of parts.
|Operating Dimension||Width800 * Height1500 * Depth3000 mm|
|Power Supply||Gas/LPG |
|Burner ||Italy Riello, 100,000cal |
|Voltage/Frequency||220V/280V/415V, 50/60Hz (voltage can be custom as local)|
|Warm-up Time||15-30min (180°C)|
|Temperature Stability||<± 3-5°C|
|Ventilation Performance ||8288-16576m3/h |
|Circulation/Air Flow ||Vertical, Varaible through holes on the walls|