leading equipment painting companies in China

Model: colo-PGC1
Place of Origin: Zhejiang,China (Mainland)
Brand Name: COLO
type: Electrostatic Spraying Equipment
Certification: CE
Method Type: manual
Application: Plastic Spraying Equipment
Pulse: electrostatic
Export Markets: global

inquiry

skype basketAdd to Basket  Edit

Share |

Product Description

Payment & Shipping Terms Supply Capacity
Unit Price:900.0~1500.0 USDProduction Capacity:5000 sets/year
Trade Term:FOBPacking:paper carton or wooden...
Payment Terms:T/T, WUDelivery Date:2-10 days
Min. Order:1 Set/Sets
Means of Transport:Ocean, Air, Land


powder spray unit of powder coating system ,used for manual powder coating,for spraying metallic products.
Advantage
0-100 Digital Adjustable KV
Fully Adjustable Amperage
PGC1 Control Unit with PG1 powder coating gun
Fully Adjustable Air for Pump on Pressure, Dosage and Nozzle Rinsing Air.
Comes with Full Array of Nozzle Assortment.
Field Tested and Proven to operate in the toughest environments.
Comes with different array of delivery systems:
Hopper Feed - 45L
this system is specially balanced for the maximum spray capability with
the Smoothest Finish Possible.
leading equipment painting companies in China


Manual powder gun

--INSTALLATION
→Propery ground all equipment in the spray area to an earth ground and maintain this ground
→Remove all containers of volatiles from the spray area
→Establish and maintain a grounded area for the spray operator
→The gun of x series must be connect to x control unit
→OPERATION
→The operator should hold the gun in his bare hand
→If gloves are worm ,the palm should be out to assure skin to metal contact
→The operator should wear shoes with conductive shoes e.g leather
Rubber shoes are not conductive .
→Ground the tip of the gun before cleaning or changing nozzles.
→When the gun is not in use , it should be hung so that the nozzle is within four inches of a grounded conductor
→The operator should wear a filter-type respiator anytime he is exposed to dusty conditions
→High pressure powder many cause injury ,Keep the rear switch  "off" position in no –use condiction
→MAINTENANCE
→Make a periodic confirmation of grounding to earh of all equipment in the spray area .
→Exercise good housekeeping practices , do not allow dirt or powder to accumulate on the feeder /powder unit , cable or gun.
→Keep the cabinet door
PERSONNEL
→Use soap and water to remove powder from the skin washing with solvents can cause reactions resulting in allergies and disourders.
→Wash hands before eating and smoking.
→Do not use compressed air to blow powder off the hands and clothing.
This practice may result in damage to the ear drums or eyes.
leading equipment painting companies in China
Manual coating equipment Function description
the powder gun through the powder hose . The powder is electrostatically
charged at the nozzle of the gun. In addition, an electrostatic field is
created between the gun nozzle and the grounded object. The charged
powder spray remains adhered to the surface of the object.
The powder is fluidized by air forced through a porous plastic plate from
below. The powder acquires, thereby, fluid-like characteristics.
The conveying air, supplementary air, and rinsing air are set on the control
Unit
Electrical data
Mains input voltage100-240 VAC
Operating frequency50-60 Hz
Input power50W
Nominal output voltage (to the gun)max. 12 V
Nominal output current (to the gun)max. 1 A
IP54
Ambient temperature range0°C - +40°C (+32°F - +104°F)
Max. operating temperature85°C (+185°F)
ApprovalsCE
Pneumatical data
Compressed air connection1/4" male quick release
Max. input pressure10 bar / 145 psi
Min. input pressure (while unit in operation)6 bar / 87 psi
Max. water vapor content of the compressedair 1.3 g/m³
Max. oil vapor content of the compressed air0.1 mg/m³
Packing Dimensions
Length120CM
Width79CM
Height73CM
Weightapprox. 55kgs
Connection Description
1.1 Air InCompressed air connection (6-10 bar / 87-145 PSI)
2.1 PowerMains cable connection (100-240 VAC)
2.2 GunGun cable connection
1.4
Electrode rinsing air connection
1.3Pict
Supplementary air connection
1.2Pict
Conveying air connection
Grounding connectionPict
Include
A control unit power supply cable
- A air filter
- A air pressure regulator
- A fluidized powder hopper
- A plug-in injector
- An manual powder gun with gun cable, powder
hose, rinsing air hose and standard nozzle set.
- Pneumatic hoses for conveying air (red), supplementary
air (black) and fluidizing air (black)
powder hose
Ground wire
leading equipment painting companies in China
leading equipment painting companies in China
leading equipment painting companies in China

Category: Hopper Feed Unit

Related Category: powder coating kit  new Powder Coating Equipment  Automatic Reciprocator  Laboratory Powder Coating Unit  Vibratory Box Feeder Unit 


«
QR Code
Contact Us
whatsapp:0086 18957102905